MICROPHONES ARE TOO QUIET/SILENT!

  • Connect the microphone(s) to the front panels MIC 1 or MIC 2 connector.
  • Mix your microphones and music:
  1. Set your music volume to 2 through the remotes MUSIC- button.
  2. Adjust the microphone volume a bit over half with the MIC VOLUME knob (around 2 o'clock position).
  3. Check that the microphones ON/OFF switch is set to ON.
  4. Check that the microphone works by talking into it.
  5. Begin to adjust the volume of your audio output device (amplifier, active speakers, TV, etc.) until your voice can be heard clearly.
  6. Adjust the music volume with the remotes MUSIC+ button, so that both the music and your voice can be heard crystal clear.

MICROPHONES SOUND IS DELAYED?

This problem is always caused by the sound system used, if the player is connected to the sound system via digital (HDMI/SPDIF) it's more likely to generate a delay/latency to your voice than via analog (RCA line-out). This is caused by digital sound processing in the sound system i.e. soundbars and home theaters. To get the least amount of delay/latency, you should connect the player via analog (RCA) because the analog signal is less processed compared to the digital signal, thus lessening the delay/latency.

Delay can also be minimized by disabling all surround sound and sound enhancement features from the playback system.

MICROPHONES TURN SILENT WHEN THE DISC STARTS PLAYING!


If the player is connected to the sound system via optical (SPDIF) or HDMI, check that in the players sound settings you've selected these modes:

AUDIO OUT = SPDIF/PCM, HDMI AUDIO = PCM

THE PLAYER DOESN'T PLAY SONGS OFF OF MY USB STICK OR EXTERNAL HARD DRIVE

  • The only supported file format for USB memory sticks and external hard drives is FAT32.
  • The external hard drive must have a external power
  • Please find the supported files listed below:
MFP-1000X supported files
MFP-1000X supported files

BUILT-IN KEY CONTROL DOESN'T WORK

  • Go to the SETUP -menu and check that DOWNMIX is set to STEREO.

THE REMOTES EQUALIZER (EQ) BUTTON DOESN'T WORK

  • Check in the the devices SETUP -menu that the AUDIO OUT -setting is set to 'SPDIF/OFF'.